menu

Anchor Ductile Mesh, Rebar, Stirrups & Links

Anchor  Ductile Reinforcing Mesh 

Anchor manufactures Ductile Reinforcing Mesh under IS0 9001. 
Independently tested by SGS & Certified by BSI.       
All Anchor Ductile Reinforcing Mesh feed is sourced from Pacific Steel:

ANCHOR DUCTILE REINFORCING MESH 
500E GRADE
CODE  wire size  spacing (mm)  length x width  finish 
Nett cover 7.262m², Gross Area 9.495m²
WWRSE62SML 6.1mm 200 x 200 4500 x 2110 Black
Nett cover 8.312m², Gross Area 10.761m²
WWRSE62RES 6.1mm 200 x 200 5100 x 2110 Black
Nett cover 11.932m², Gross Area 14.809m²
WWRSE62LARGE 6.1mm 200 x 200 5900 x 2510 Black
Nett cover 10.432m², Gross Area 13.167m²
WWRSE72 7.0mm 200 x 200 5700 x 2310 Black
WWRSE82 8.0mm 200 x 200 5700 x 2310 Black
WWRSE92 9.0mm 200 x 200 5700 x 2310 Black

 

Anchor Ductile Reinforcing Mesh is produced to AS/NZS 4671 
Class 1 Building (Building Product Information Requirements Regulations 2022)

Anchor Wire - Class 1 BPIR Info Sheet.pdf

Lapping Detail
NZS 3101 – lapping 1 square + 50mm. Engage with your designer or installer for specific requirements

Anchor Ductile Reinforcing Rebar 

Anchor’s rebar is sourced from Pacific Steel and Tung Ho Steel:

ANCHOR DUCTILE REINFORCING BAR 
500E GRADE & 300E GRADE
CODE  BAR SIZE  Grade/MPA  Elongation  Length  Number/Bundle  Weight/Bundle 
ACSTROD10 10mm 300 15% 6000mm   1000kg
ACSTROD12 12mm 300 15% 6000mm 350 1865kg
ACSTROD16 16mm 300 15% 6000mm 211 1998kg
ACSTROD20 20mm 300 15% 6000mm 135 1998kg
ACSTRODH10 10mm 500 10% 6000mm 270 1000kg
ACSTRODH12 12mm 500 10% 6000mm 350 1865kg
ACSTRODH16 16mm 500 10% 6000mm 211 1998kg
ACSTRODH20 20mm 500 10% 6000mm 135 1998kg


Pacific Steel 300E: https://www.pacificsteel.co.nz/products/reinforcing-bar-and-coil/grade-300e-bar 
Pacific Steel 500E: https://www.pacificsteel.co.nz/products/reinforcing-bar-and-coil/seismic-500e 
Tung Ho Steel 300E: Tung Ho Steel 300E Class 1 BPIR Info Sheet.pdf
Tung Ho Steel 500E: Tung Ho Steel 500E Class 1 BPIR Info Sheet.pdf

Anchor Ductile Stirrups & Links 

Anchor manufactures Ductile Stirrups and Links (10mm only) under IS0 9001. 
Independently tested by SGS & Certified by BSI.       
All Anchor Ductile Stirrups and Links feed is sourced from Pacific Steel:

ANCHOR DUCTILE LINKS 
10mm ONLY 500E GRADE
CODE  Decription  Units/Bundle 
ACLINKR10150 LINK R10 X 150MM 25
ACLINKR10200 LINK R10 X 200MM 25
ACLINKR10250 LINK R10 X 250MM 25
ACLINKR10300 LINK R10 X 300MM 25
ACLINKR10450 LINK R10 X 450MM 25

ANCHOR DUCTILE STIRRUPS 
10mm ONLY 500E GRADE

CODE  Decription  Units/Bundle 
ACSTR101515 STIRRUPS R10 150 X 150MM 25
ACSTR101525 STIRRUPS R10 150 X 250MM 10
ACSTR102020 STIRRUPS R10 200 X 200MM 10
ACSTR102525 STIRRUPS R10 250 X 250MM 10
ACSTR102545 STIRRUPS R10 250 X 450MM 10
ACSTR103030 STIRRUPS R10 300 X 300MM 10
ACSTR103035 STIRRUPS R10 300 X 350MM 10

https://www.pacificsteel.co.nz/products/reinforcing-bar-and-coil/500e/

Anchor Ductile Stirrups and Links are produced to AS/NZS 4671
Class 1 Building (Building Product Information Requirements Regulations 2022 Building Act 2004 section 26).

The above products are not subject to a warning or ban. 

 

                       

                 

Contact us today for more information: 

Tel: +64-9-2666 666 
Fax: +64-9-2662 992 
Email: sales@anchorwire.co.nz 
Web: www.anchorwire.co.nz 

PO Box 97-855 
Manukau 2241 
Auckland, New Zealand 

131 Kerrs Road 
Auckland, New Zealand

NZBN 9429040568829

Address for service 
Marley Loft Ltd, Level 6, 130 Broadway, Newmarket, Auckland, New Zealand

*Anchor Wire Ltd is only bound by supplier and purchaser terms if confirmed in writing.

Contact Us

Please use the following form to send your enquiry.








Powered by: Woo