|
ANCHOR ASM 358 MESH PROPERTIES
Sheet Size
1.200m width x 2.400m height
Mesh Design
4.00mm wire, resistance welded at each intersection.
Line wires positioned at 75mm centres.
Cross wires positioned at 13mm centres.
Welding
Resistance welded in compliance with the
requirements of AS2423-2002
Mesh Aperture
71mm x 9mm
Tolerances
Sheet Width +/- 2mm
Sheet Length +/- 2mm
Mesh Aperture +/- 0.5mm
Wire Diameter +/- 0.08mm
Wire
Bezinal 2000 - 4.00mm zinc alloy coated wire.
95% zinc 5% aluminium wire.
Tolerance +/- 0.08mm
Wire Coating Mass
Zinc Aluminium coating to AS/NZS4534
Class W10D
Minimum Coating Mass - 260 g/m2
Average Coating Mass - 300 g/m2
Tensile Strength
Ultimate Tensile Strength 500-625 MPA
Average Tensile Strength 560 MPA
Weld Shear Strength
Exceeds requirements specified in AS2423-2002
|
*special sizes available on request